Common thread of our standard list of china

No. Name of the standard categories of standards with international standards, the relationship between the
Common thread common thread of basic dental GB/T192 -1981 and ISO68-based equivalent
Common thread diameter and pitch series with ISO261 equivalent GB/T193 -1981
The basic size of an ordinary screw with ISO724 equivalent GB/T196 -1981
Common thread of tolerance and cooperation GB/T197 -1981 and ISO965 / 1 equivalent
Common thread GB/T2516 -1981 deviation table and ISO965 / 3 equivalent
Threaded fasteners of general merchandise selection and JB/T7912 -1999 Series ISO262 equivalent
Commodity fasteners ordinary middle-precision thread size limit GB/T9145 -1988 and ISO965 / 2 equivalent
Special optical instruments optical thin thread dental thread ZBN30006-1988 --
Optical devices using eyepiece thread JB/T8204-1995
Optical instruments with short teeth JB/T5450-1991 thread
Tight with the screw thread with the transition GB/T1167-1996 --
GB/T1181-1998 thread fit
Small screw-type small screw teeth with ISO1501 equivalent GB/T1505 4.1-1994
Small screw diameter and pitch series GB/T1505 4.2-1994
The basic size of small thread GB/T1505 4.3-1994
GB/T15054.4-1994 small thread tolerance
Limit the size of small thread GB/T15054.5-1994
MJ Thread Thread MJ basic tooth type GJB/T3.1 -1982 ISO5855
MJ bolt and nut thread size and thread tolerance GJB/T3.2 -1982
MJ Thread Thread pieces of pipe size and tolerance GJB/T3.3 -1985
MJ thread structure of the size and tolerance GJB/T3.4 -1985
MJ thread formula GJB/T3.5 -1985
MJ thread both GJB52-1985
Trapezoid trapezoidal thread screw-type teeth with ISO2901 equivalent GB/T5796 .1-1986
Trapezoidal thread diameter and pitch with the ISO2902 series equivalent GB/T5796 .2-1986
Trapezoid thread and the basic size ISO2904 equivalent GB/T5796 .3-1986
Trapezoidal thread tolerance and ISO2903 equivalent GB/T5796 .4-1986
Trapezoidal thread size limit GB/T12359-1990 --
Machine tool trapezoidal screw, nut technology JB/T2886-1992
Forged steel valve trapezoidal thread with a short tooth JB/TQ374-1985
Zigzag zigzag thread (3 °, 30 °) screw-type dental GB/T13576.1-1992 --
Zigzag (3 °, 30 °) in diameter and thread pitch series GB/T13576.2-1992
Zigzag (3 °, 30 °) the basic size of thread GB/T13576.3-1992
Zigzag (3 °, 30 °) Thread GB/T13576.4-1992 Tolerance
45 ° hydraulic press thread serrated teeth the size and basic type JB2076-1984
Pipe Thread Seal the tube with screw thread GB/T7306 -1987 and ISO7 / 1 equivalent
Non-threaded pipe thread sealing GB/T7307 -1987 and ISO228 / 1 equivalent
Pipe Thread 60 ° Cone GB/T12716-1991 --
GB/T1415-1992 metric taper thread
Screwed pipe thread end of the general size range GB/T1414-1978
Cylinder thread dedicated GB/T8335-1998
General benchmark thread with ISO5408 terminology such as GB/T1479 1-1993